Blade 200 SR X RTF Bedienerhandbuch PDF herunterladen (Seite 8)

LP6DSM Binding Procedure

1. Disconnect the ﬂ ight battery from the helicopter.

2. Lower the throttle stick to the lowest position. Set the throttle trim to the highest position.

Set all other trims to the center position.

3. Power off the transmitter.

4. Install the bind plug in the receiver BIND/PROG port.

5. Connect the ﬂ ight battery to the ESC. The receiver LED ﬂ ashes, indicating it is in bind mode.

6. When the LED is ﬂ ashing, press and hold the Bind Switch while powering on the transmitter.

7. The transmitter will beep and the LED will blink. Release the Bind Switch when the transmitter stops beeping.

8. The helicopter is bound when the LED on the receiver control unit is solid.

9. Disconnect the ﬂ ight battery and power the transmitter off.

If you encounter problems, obey binding instructions and refer to the troubleshooting guide for other instructions.

If needed, contact the appropriate Horizon Product Support ofﬁ ce. For a list of compatible DSM

transmitters, please

visit www.bindnﬂ y.com.

RTF

Your RTF transmitter comes prebound to the model. If you need to re-bind, follow the directions below.

Revolutionary SAFE™ (Sensor Assisted Flight Envelope) technology uses an innovative combination of multi-axis sensors

and software that allows model aircraft to know its position relative to the horizon. This spatial awareness is utilized to create

a controlled ﬂ ight envelope the aircraft can use to maintain a safe region of bank and pitch angles so you can ﬂ y more safely.

Far beyond stability, this level of protection offers multiple modes so the pilot can choose to develop his or her skills with a

greater degree of security and ﬂ ight control that always feels crisp and responsive.

SAFE technology delivers:

• Flight envelope protection you can enable at the ﬂ ip of a switch.

• Multiple modes let you adapt SAFE technology to your skill level instantly.

Best of all, sophisticated SAFE technology doesn’t require any work to enjoy. Every aircraft with SAFE installed is ready to use

and optimized to offer the best possible ﬂ ight experience.

FlySAFERC.com

Technology

™

Panic Recovery

• Immediate recovery to a safe ﬂ ying attitude.

• Move the throttle to 50% and return all other transmitter controls to neutral for the quickest recovery.

• This mode is intended to provide the pilot with the conﬁ dence to continue to improve their ﬂ ight skills.

If you get into distress while ﬂ ying in any mode, pull and hold the Bind/Panic Switch and move the control sticks to their

neutral position. The SAFE technology will return the aircraft to a stable attitude, if the aircraft is at a sufﬁ cient height with no

obstacles in its path. Release the Panic Switch to turn off Panic Recovery and return to the current ﬂ ight mode.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Keine Kommentare

Blade 200 SR X RTF Bedienerhandbuch Seite 8